SEA   FURNITURE

Solo-None Swivel                                   Solo With Swivel

 Solo Spider Post                                   Tripod Post

FOOTRESTS



   SS18004

Stainless Steel Adjustable Pedestal (22"-32") Gas Operated 12" Base 4" Diameter Tube Fits Any 2 7/8"  Slider/Spider Assembly

SS17002                                                        

Adjustable Height Table Pedestals

Made of 316L Stainless Steel Mirror Polished to Perfection These Pedestals Are Made With Slide top (left pedestal) and Solid Top.

 The slide Top Pedestal is Adjustable With a Hand Cranked Mechanism From 20" or Less to Over 30" Of Height. The Pedestal Can be Locked In To The Desired Height With Positive Lock Lever. The Maintenance Free Hand Cranked Mechanism Gives This Pedestal A Very Long Life. The Slider Top Will Give You The Option Of Having The Table Top Travel of 10" .

The Solid Top Pedestal is Adjustable With a Hand Cranked Mechanism From 20" or Less to Over 30" Of Height. The Pedestal Can Be Locked In To The Desired Height With Positive Lock Lever. The Maintenance Free Hand Cranked Mechanism Gives This Pedestal A Very Long Life. The Solid Top Will Give This Table Pedestal  The Solid And Sturdy Feel .

Please Call For Availability And pricing

SS17003

 SS12704                                                                                                  

Stainless Steel Gas Rise                         

 4" Diameter with 12" Base              
 22" To 32" Travel                              

 AL 14501  

 ALUMINUM GAS RISE

 4" Diameter with 12" Base          

22" To 32" Travel    

 SS14500

Stainless Steel Fixed Height

  4" Diameter with 12" Base                       

1450022-P

4" Aluminum Pedestal  Elite 4" Pedestal Designed to work with fighting chairs or your Helm Chair for that added Stability. 12" to 30" Fixed Heights Available.


 Provides solid base of support for a variety of seat hardware
 2 7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm) diameter 6 hole base plate


Specifications

75531: 9" (23cm) Overall Height
75530: 12" (30cm) Overall Height
75515: 15" (38cm) Overall Height
75532: 18" (46cm) Overall Height
75533: 24" (61cm) Overall Height
75534: 30" (76cm) Overall Height  

BLUE WATER ADJUSTABLE HEIGHT POSITIVE PIN TYPE LOCK PEDESTAL - RIBBED SERIES

    Pin secures base at specific height in 1" increments
    Stainless steel lock pin locates securing hole easily
    Anodized protective finish helps prevent saltwater corrosion and weathering
    2 7/8" (7cm) diameter ribbed stanchion tube, 9.25" (23cm) diameter 6 hole base plate

Buy It
Specifications

75635 : 12" - 17" (30 - 43cm) Height
75628 : 18" - 23" (46 - 58 cm) Height

  FIXED HEIGHT MID-RANGE PEDESTAL
Model Numbers

78515 78524 78530

    3.5" Diameter Stanchion for Mid-Size (30 Ft.+) Boats
    Proportionately to Scale for added Strength and Styling
    Design accommodates all Garelick EEz-In Seat Slide and Swivel Spiders
    Popular Heights Available – 3 Fixed Heights and 2 Adjustable Heights
    Meets ABYC, H-31 Type A Standards
    3.5" (9 cm) diameter smooth stanchion tube, stanchion base casting 10.5" (27 cm) diameter 6 hole, 3/8" mounting holes.
    Polished and Anodized aluminum components

Buy It
Specifications

78515: 15" (38 cm) High
78524: 24" (61 cm) High
78530: 30" (76 cm) High

  These shock-absorbing pedestals are designed for rough seas and will take a lot of pounding these pedestals are designed to be mounted to a universal flat-bottomed slider for fore and aft movement or It has a square 6.5x6.5 inch flat top with universal mounting holes at each corner,  or 2 7/8" top post for spider attachment. Proper orientation is required for installation. The round base is a standard 9-¼” OD with a 6-hole bolt pattern. Proper operating range is between 140 -275 lbs total seated weight. Please consult the factory for heavier or other special applications.

Heights:
16 in (40.64 cm)
19 in (48.26 cm)
22 in (55.88 cm)
25 in (63.50 cm

  75470          

  TWO STAGE GAS RISE YACHT TABLE PEDESTAL - ADJUSTABLE HEIGHT

Polished and anodized finish resist saltwater corrosion. Smooth gas powered operation adjustable full range 15" - 30" (38 - 76cm) Robust design provides adjustable height in salon/cabin and back deck areas. - Lift - adjust height - lock with polished stainless handle.
 Range of travel 15" - 30" (38 - 76cm), 12" diameter base casting with 4", 3.5" & 2.875" diameter stanchion tubes, Top plate surface 9" x 13" (23 x 33cm)
 

 75471

  2600676  Table Lift Pedestal

*The unique design allows the pedestal to be used in an upward position as a table unit pedestal and allows it to offset(3"-4") to a low berth position. *Gas powered cylinder assist makes for easy adjustment from a low 12 1/8" to a high 27 3/4" height. *All hinge points are nylon insulated for smooth operation.
*Small 7 3/4" X 10 3/4" foot print. *Stainless steel hardware, high-strength aluminum and engineering-grade plastic used throughout.
 

GAS RISE YACHT TABLE BASE  GR-75460

Provides adjustable height in salon/cabin areas    Self-standing 19" (48cm) square base, 3/8" thick with 9" x 13" (23x33cm) table top support, 1/4" thick    Polished and Anodized finish to resist saltwater corrosion     Ultra smooth gas powered operation adjustable 20" - 29" (51 - 74cm)
Specifications :  75460 : 3/8" thick anodized aluminum plate with 3.5" stanchion tube, twist lock T-Handle (40 lb. Gas Spring)


GAS RISE TABLE TABLE BASE Model Numbers 75325  Converts dinettes to berths
   9"(23cm) diameter cast aluminum base on each end for support
   2.875" (7cm) stanchion tube
  In lower position inside tube goes below deck 6" (15cm)
   Locks any height from 14.5" to 29.5" (37 - 75cm)

TWIN TOWER TABLE BASE Model Numbers 75451
provides adjustable height in salon/cabin areas
Ultra-smooth gas powdered operation, table height adjusts from 18" to 26.5"    Single knob, remote actuation system adjusts both pedestals in uniso    3 1/8" diameter anodized bright polish tubing
Self-standing with 2-D shaped anodized aluminum base plates, 7" x 24"
Specifications

75451 : Anodized aluminum top plate is 12" x 37" x 1/4"



*Great for your boat, RV, deck and patio! *Limited space or tight quarters? Add our new "Swing Away" table pedestal 78722
*Adjustable table mount allows the table to fold flat and stored out of the way. *Table post will "Swing Away" to either side. *Adjustable post to acquire desired height
*Stainless Steel Construction. (Table Top Not Included)

 

ALUMINUM CHAIR / SEAT STAND Model Numbers 75141 75047 75161 71031
Complete portability for pilot, helm or fishing chairs
Four prong spider swivel mounted on 2 7/8" (7cm) anodized aluminum tube frame allows 360° rotation
Premium poly tipped legs
Specifications

75141 : 24" (61cm) height, 21" (53cm) leg spread
75047 : 28" (71cm) height, 21" (53cm) leg spread. Includes 75016 top swivel

 

 ANODIZED ALUMINUM QUAD SEAT BASE Model Numbers 75156
Constructed from 1" Anodized aluminum
HDPE platform supports low rise anodized aluminum no neck pedestal (4 3/4" H, 75404)
Accepts 2 7/8" swivels and swivel/slide systems
Specifications

75156 : 20"x20" leg spread. 13" height to top of pedestal

 



7407-8    Six Star Mobile Pedestal&Footrest
The 7407 features a 4” mounting post which is adjustable from 18” to 28”. The 7408 also has a 4” post, but adjusts from 23” to 33”. With six legs spanning 33” from side to side, the Helmsman offers rock-solid stability in even the roughest water. Plus each leg has a 1-1/4" rubber foot pad for a positive grip on all surfaces. The Six star system is equipped with small wheels on the two back extension for easy mobility This configuration makes it desirable for even the most luxurious boats.

Constructed of 5052-H32 .160 thick aluminum, the entire unit is protected by a black UV texture powder coat. The Helmsman fits all existing marine hardware and seats. Pedestal $790. Foot Rest $285

 

 

 

2311 Aluminum Fold Up Footrest

 Three adjustments for the foot plate

2321 Aluminum Retractable Footrest Fits 2 7/8" or 4" OD pedestals

 2332 Aluminum Powder Coat Footrest Fits 2 7/8" or 4" OD pedestals

2341 Cast Aluminum Footrest Fits

2 7/8" or 4" OD Pedestals 

Optional Solid Teak Top Available

2351 Solid Mahogany Footrest Fits

2 7/8" OD pedestal. 2" Footrest Thickness

2362 Stainless Steel Fold Up Footrest With Solid Teak Step

 2371 Stainless Steel Round Footrest Fits 2 7/8" or 4" OD Pedestals. 20" Diameter

2381 Cast Aluminum Footrest Fits 2 7/8" OD Pedestal